MORLEY ZX10Se Manuel d'installation télécharger pdf (Page 11)

ZXr-A / ZXr-P Repeaters MORLEY-IAS

Operation & Installation Manual Document No. 996-144, Revision: 02, Page 11 of 16

4 Operation and Controls

• The ZXr-A / ZXr-P Repeaters are equipped with a backlit 2x40 Liquid Crystal Display and LED Indicators

to show the status of the Fire Alarm Control Panel (FACP) and the installation.

• In addition, the ZXr-A is equipped with a key operated switch and five CONTROL keys and a TEST key.

• The operation of the Repeater is as follows:

4.1 Liquid Crystal Display

• The operation of the liquid crystal display is identical to the display on the FACP.

• Under normal conditions it will simply show the time and date, together with a message to show that the

detectors are working normally. The backlight is normally off. It will turn on for 30 seconds whenever a key

is pressed. It will always turn on during a fire alarm condition.

• If any fault or fire alarm conditions occur, these will be displayed on the display. If several faults or fires

have occurred, then these will be scrolled on the display.

• Refer to the FACP Manuals for information on the messages that are displayed.

4.2 LED Indicators

Power

Fault

cce

ted

Disablement

Silenced

FIRE

Comms. Fail

• The LED indicators (except DC Power) will be

illuminated in response to signals from the

FACP.

• The LED Indicators are a sub-set of the

indicators on the FACP. The following table

indicates the function of each LED indicator.

Refer to the FACP Manuals for further

information on the function and operation of each

LED indicator and on the operation of the

system.

Indicator Colour Function

FIRE Red The panel has detected a fire alarm condition,

or the ‘Sound Alarms’ key has been pressed.

Fault Yellow The panel has detected a fault.

Accepted Yellow A fault or fire alarm has been acknowledged

and the internal buzzer silenced.

[After pressing the ‘Mute Buzzer’ or ‘Accept’

keys at either the FACP or the Repeater].

Disablement Yellow Part of the system, either input or an output,

has been disabled.

Silenced Yellow The sounder outputs have been silenced.

[After pressing the ‘Silence / Resound’ key at

either the FACP or the Repeater].

Comms. Fail Yellow The repeater has lost contact /

communications with the FACP and is unable

to update its LCD and LED indicators. The

control buttons on the ZXr-A will not function

during this condition.

Power Green ON: Indicates DC Power is present.

Table 2 - LED Functions

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

MORLEY ZX10Se Manuel d'installation Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Protection contre les incendies MORLEY ZX10Se